Baty

Reprorubber offers numerous advantages over other hard-copy replicating materials: • Quick casting – zero shrinkage • No release agent required – will not stick to part • Surface finish replication is exact with excellent optical properties easily checked on an optical comparator or video inspection machine • Copies can be re-copied from original mould • Replicas are permanent – will not leach out, ooze out, or gas out • No more 16 hour cure time as with RTV silicones • More accurate than all other RTV compounds Original Reprorubber® Thin Pour - Final Colour: LIGHT GREEN For internal-shape applications where a thin pour will completely fill the cavity without voids. A complete replica casting is quickly formed. • Manipulation time is approx 2 minutes and cure time is approximately 10 minutes • Start to finish: approximately 12 minutes • Kits include graduated mixing cups, wooden spatulas and instructions Original Reprorubber® Quick Setting Putty - Final Colour: LIGHT BLUE Roll two equal-sized balls of catalyst putty and base putty and simply knead them together like dough. Excellent for external shapes. Simply spread over master pushing down with fingers and wait for cure 8-10minutes. Manipulation time is 1 to 2 minutes. Therefore 12 minutes start to finish. You can also cast internal shapes and cavities but some pressure should be applied such as a weighted object on top. New Reprorubber® Orange – Medium Body Pre-filled Cartridges - Final Colour: ORANGE New Medium Body (Medium Viscosity – Medium Durometer) casting material ideal for both internal and external applications. Disposable pre-filled dual barrel 50ml cartridges can quickly dispense casting material utilising the REPRO-MIX II Gun System. • Mix time: 15-30 seconds and cure time is 5-6 minutes • Start to finish: 6-8 minutes Quick Dispense Cartridge System Kit Contains everything you need to easily create highly accurate, zero shrinkage replicas. Each kit includes 1 each: • Repro-Mix II reusable dispensing gun • 6 each 50ml pre-filled Reprorubber disposable cartridges • 15 disposable mixing nozzles • 2 micro injector snap-on nozzles • Deluxe fitted carrying case

Reprorubber Cartridges

FT2-E: Complete TOUCH SCREEN DRO with 2D Fusion touch sw. Full geometric functionality. Built in optical edge detection allows data points to be taken ‘on the fly’ as the projected image is passed under the screen mounted fibre optic sensor. View of measured part can be printed as a fully dimensioned drawing. Full reporting capability includes, SPC, tabulated details with pass / fail analysis, auto link to Excel and auto sequence programming feature. Windows O/S and built in 19" portrait touch screen monitor in a rugged all steel housing. XLS: A simple two axis digital readout featuring a colour LCD display, Absolute / Incremental modes, Zero reset, MM/Inch & Radius / Diameter conversion. GXL: As XLS with geometric functions for skew alignment, angle, radius, point, line, circle. Automatic feature list and graphical view. Macro programming facility guides the operator through the measurement process. Feature tolerancing and standard report printout. Footswitch compatible. GXL-E (pictured): As GXL with profile edge sensor to take data points automatically. Eliminates operator error and speeds up inspection times.

The Baty range of Plunger Dial Indicators includes a model for all applications. Building on decades of experience we offer standard indicators in most popular sizes.

The Baty HL series of lever-type dial test indicators are top quality, Swiss-made precision instruments. Low inertia jewelled movements and rugged construction make them suitable for universal applications in the workshop and inspection departments.

The Baty tyre tread depth gauge has been specially designed to measure the remaining tread depth on motor vehicle tyres to a very high degree of accuracy. Many simple gauges currently available give only an approximate indication of depth, and have been found inaccurate up to 0.5mm. Such errors could be the difference between legal and illegal! The gauge can be supplied with a calibration certificate traceable to national standards if required. Tyre gauge comes supplied in a pvc wallet. The Baty tyre tread gauge has colour-coded bands on the dial: GREEN BAND: tread depth in excess of 2mm and is therefore safe/legal YELLOW BAND: tread depth between 2mm and 1.6mm: depth legal but CAUTION – tyre will need replacing very soon RED BAND: tread depth less than 1.6mm: ILLEGAL! Tyre must be replaced

An extensive range of dial caliper gauges for measuring external dimensions. These instruments can be used as direct reading instruments for quick checking of components such as castings prior to machining or for the checking of wall thickness in difficult to measure components such as valve or pump bodies. Alternatively they can be used as a comparative gauge when set to a measuring standard and the indicator zeroed. When used as a comparative gauge it is generally recognised that a higher standard of accuracy is achieved. Every major caliper comes fitted with an indicator. These indicators are specially adapted for use on major calipers and are calibrated along with the instrument. Under no circumstances should indicators be interchanged between instruments. For finer reading options, please contact our sales team.

Baty dial thickness gauges are direct reading instruments for quick and accurate measurement of rod, strip or sheet material. All standard instruments are supplied with 10mm (0.39") diameter flat contacts. The well balanced frame and handgrip make these thickness gauges very easy to use for the measurement of sheet materials. The range of throat depths permit measurements to be made across the sheet. The lifting lever and springloaded spindle ensures controlled contact pressure on the work.

The Baty range of Plunger Dial Indicators includes a model for all applications. Building on decades of experience we offer standard indicators in most popular sizes. All units are supplied with 8mm stems, M2.5 threads and offset lug backs as standard.*

Calibration certificate supplied with all Group 2 indicators reading 0.01mm or finer.

The Baty range of Plunger Dial Indicators includes a model for all applications. Building on decades of experience we offer standard indicators in most popular sizes.

Non-standard configurations are also available on request.

image shows:
FI-3 fitted with MA-110 roller anvil
FI-6 fitted with MA-119 flat anvil

The Baty range of Plunger Dial Indicators includes a model for all applications. Building on decades of experience we offer standard indicators in most popular sizes. All units are supplied with 8mm stems, M2.5 threads and offset lug backs as standard.*

Non-standard configurations are also available on request.

These are versatile instruments with countless uses in workshops and inspection departments; for example, concentricity checks, marking-out table and surface plate work, alignment of machine tools, testing, parallelism, etc.