PRODUCT FILTER
  • Baty Dial Thickness Gauges
    Baty dial thickness gauges are direct reading instruments for quick and accurate measurement of rod, strip or sheet material. All standard instruments are supplied with 10mm (0.39") diameter flat contacts. The well balanced frame and handgrip make these thickness gauges very easy to use for the measurement of sheet materials. The range of throat depths permit measurements to be made across the sheet. The lifting lever and springloaded spindle ensures controlled contact pressure on the work.
    View Product
  • Baty Major Calipers - External
    An extensive range of dial caliper gauges for measuring external dimensions. These instruments can be used as direct reading instruments for quick checking of components such as castings prior to machining or for the checking of wall thickness in difficult to measure components such as valve or pump bodies. Alternatively they can be used as a comparative gauge when set to a measuring standard and the indicator zeroed. When used as a comparative gauge it is generally recognised that a higher standard of accuracy is achieved. Every major caliper comes fitted with an indicator. These indicators are specially adapted for use on major calipers and are calibrated along with the instrument. Under no circumstances should indicators be interchanged between instruments. For finer reading options, please contact our sales team.
    View Product
  • Baty Tyre Tread Depth Gauge
    The Baty tyre tread depth gauge has been specially designed to measure the remaining tread depth on motor vehicle tyres to a very high degree of accuracy. Many simple gauges currently available give only an approximate indication of depth, and have been found inaccurate up to 0.5mm. Such errors could be the difference between legal and illegal! The gauge can be supplied with a calibration certificate traceable to national standards if required. Tyre gauge comes supplied in a pvc wallet. The Baty tyre tread gauge has colour-coded bands on the dial: GREEN BAND: tread depth in excess of 2mm and is therefore safe/legal YELLOW BAND: tread depth between 2mm and 1.6mm: depth legal but CAUTION – tyre will need replacing very soon RED BAND: tread depth less than 1.6mm: ILLEGAL! Tyre must be replaced
    View Product
  • Baty Traditional 2 Point Bore Comparator Set
    Baty Dial Indicating Bore Gauges allow rapid and accurate checking of bores for size, ovality, taper, wear, etc. in the workshop or inspection room.
    View Product
  • Baty Crankshaft Alignment Gauge Set
    If an engine crankshaft is not correctly aligned in its bearings, it distorts and becomes subject to damaging stresses. Any misalignment causes a change in the distance between webs when the shaft revolves and can be detected by placing an indicating device between the webs. The Baty crankshaft alignment gauge is designed for this purpose. Its contacts are pointed and fit into dimples in the webs. A heavy spring pressure ensures that the gauge is retained but is free to turn in relation to the crankshaft and an adjustable balance weight restrains the gauge against rotation of the crankshaft so that the dial always faces the inspector.
    View Product

15 Item(s)

per page