PRODUCT FILTER
  • CV Portable Analogue Hardness Testers - CV Instrumatic
    A fully mechanical instrument of the highest precision, robust, and maintenance free. The large clearly marked dials on these unique instruments cover a full range of hardness values in Vickers, Brinell, Rockwell A, B, C, covering national and international standards. The Instrument The system is entirely mechanical employing the use of special pre-loaded springs which provide a load of about 15Kg to the diamond. Maximum penetration of the diamond into the specimen is 0.125mm (0.005"). Operation and Use The simplicity of the tester enables it to be used in almost any direction, without affecting accuracy. It can be used ‘on site’ with complete success. The grips are depressed to the fullest extent by using the palms of the hands and the hardness value can be read off the appropriate scale. Repeatability is excellent and the calibration can be checked by the user against a UKAS certified reference test block supplied with each instrument. Each tester is supplied complete with case and detailed operating instructions.
    View Product
  • Portable Magnetic Rockwell Tester - W-INMR/01
    Magnetic base hardness tester designed according to the principle of Rockwell hardness testing.
    View Product
  • Indenters For All Hardness Scales
    With official calibration certificates UKAS, DKD or ASTM. CV Instruments offers a wide range of indenters. All certified indenters will be issued with a certificate traceable to internationally recognised standards such as UKAS, DKD or ASTM. We also offer low cost factory certified indenters and specials (see below). Specials CV Instruments also offer special adapters for indenters to enlarge the field of application. Small gooseneck adapters are available in three sizes to permit regular or superficial Rockwell hardness testers to perform internal tests on rings, tubes and annular parts where the inside diameter, plus the wall thickness, is less than 50.8mm or 2". These adapters will fit any of the standard Rockwell hardness testers. The gooseneck adapter can be clamped into the bottom of the plunger rod (in the same manner as an indenter) and is not heavy enough to affect a reading due to increasing the applied load. The minimum internal diameter which can be tested is 11.5mm or 7/16". Ask for our separate product list of indenters.
    View Product
  • Multi-Functional Digital Force Gauge IPX-800
    With integrated load cell and external load cell.
    View Product
  • Coating Thickness Gauge IPX-201F
    Handheld coating thickness gauge with F-probe for steel substrates.
    View Product

Items 16 to 30 of 33 total

per page
Page:
  1. 1
  2. 2
  3. 3