PRODUCT FILTER
  • Baty Vision Systems - Venture XT CNC
    The Venture XT- CNC has Fusion 3D software, a 300mm x 300mm x 200mm XYZ stage and includes a controller and 2 x 19 inch monitors. Venture CNC models take the power of fusion software one stage further by completely automating the inspection process. Now advanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators. CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification and auto focus changes are all recorded into the program. CNC Functionality The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using video edge detection for optimum speed and reduced inspection times. A probe changer rack can be installed so that probe modules fitted with a variety of pre-calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. When programming using the touch probe, use only the minimum points required to define each element. Then simply edit in the optimum number of points for each element. The new probe path is then automatically created when the program is played, cutting down both programming and inspection time. Alternatively, features can be programmed directly from an imported 3D CAD model.
    View Product
  • Bowers Steel Rules & Tapes
    Graduated Steel Straight Edge Manufactured to DIN 866/1 the gauging surfaces have been precision ground. The clear and easy to read metric graduations start 5mm in from the ends.
    View Product
  • Bowers Straight Edges & Parallels
    Manufactured out of spring steel these straight edges are precision ground.
    View Product
  • Baty Vision Systems - VuMaster
    The BATY VuMaster is a 2D vision system with a massive difference. Due to its innovative absolute 2D scale system, the newly designed VuMaster does not have a conventional moving stage or encoders - just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range - 400mm x 300mm. Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices. VuMaster is either operated manually or inspection routines can be recorded and stored. When played back, these ‘programs’ either run automatically, (CNC). or guide the operator through a pre-defined inspection procedure recreating the same lighting conditions and using ‘Video Edge Detection’ to automatically ’capture’ feature data. Finally, a report is generated in the form of a fully dimensioned drawing of the measured part.
    View Product
  • Baty R600
    The Baty R600 with its 600mm (24") screen and high specification presents the capability to make simple comparative non-contact measurement through to complex programmed measuring sequences with SPC capability and automatic edge detection. The horizontal light beam configuration is ideally suited to large machined or turned workpieces for mounting in vee blocks and centres.
    View Product
  • Baty R400 - Profile Projector
    The Baty R400 bench mount profile projector with its 400mm screen combines high accuracy non-contact measurement and inspection with a large 300mm x 150mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The robust design of the R400 makes it suitable for both the shop floor and the standards room.
    View Product
  • NOUVEAU Micromètre à poignée pistolet XT3 avec Bluetooth - métrique
    Avec un écran LCD plus large et plus lisible, le Bowers XT3 Holematic a été conçu pour offrir un design plus ergonomique. Il répond à l'indice de protection IP67, est équipé d'une sortie de proximité et est disponible avec Bluetooth intégré en option; tous deux permettant une communication bidirectionnelle pour une plus grande flexibilité d'acquisition et de stockage des données. Nos alésomètres standards peuvent se décliner en variante spéciale pour répondre à vos besoins de contrôle sur des applications complexes (contrôle de filetage, cannelures, rainures, gorges...) La gamme XT3 de chez Bowers est disponible en instrument individuel ou en jeu. Tous nos instruments sont fournis avec le certifcat d'étalonnage UKAS à la fois pour les têtes de mesure et les bagues étalons.
    View Product
  • Nouveau XTA Micro - Micromètre analogique - Métrique
    Le NOUVEAU XTA Micro offre un design plus ergonomique. Conçu avec un vernier plus compact, le XTA Micro est beaucoup plus léger et l'échelle de graduation améliore la résolution de 5µ à 2µ.
    View Product

Items 1 to 15 of 441 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. ...
  6. 30