• Wireless Transmission Receiver
    Allowing the wireless transmission of measurement values from gauge to PC, the IBRit-rf1 Radio Module is the latest development in interface technologies. Communicating with up to 120 gauges, and with a maximum transmission distance of up to 200m, the wireless data transfer module connects via a port to your PC. The PC transmits address numbers to each gauge radio module where they are stored. The transmission of a measurement value is triggered simply by pressing the data key on the gauge module or on the gauge itself. An audible tone and visible light confirms a successful data transmission. Special data coding between the PC and the gauge radio module guarantees absolute data security.
    View Product
  • Wireless Transmission Receiver
    Allowing the wireless transmission of measurement values from gauge to PC, the IBRit-rf1 Radio Module is the latest development in interface technologies. Communicating with up to 120 gauges, and with a maximum transmission distance of up to 200m, the wireless data transfer module connects via a port to your PC. The PC transmits address numbers to each gauge radio module where they are stored. The transmission of a measurement value is triggered simply by pressing the data key on the gauge module or on the gauge itself. An audible tone and visible light confirms a successful data transmission. Special data coding between the PC and the gauge radio module guarantees absolute data security. Special versions of radio modules Gauge radio modules with external antenna The Standard IBRit - rf1 radio modules are delivered with an integrated antenna. For max. transmission power, all radio modules can be delivered with an external antenna. Gauge radio modules with terminal strips The IBRit - rf1 radio modules can be delivered optional with terminal strips for the connection of external switches for data transmission.
    View Product
  • Wireless Proximity Module
    The new MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1.0-6.0mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.
    View Product
  • Wireless Transmission Receiver
    A complete listing of cables and output accessories to suit the Bowers Metrology range of instruments.
    View Product
  • Cables & Accessories
    Cables and output accessories for the WYLER range of instruments available from Bowers.
    View Product
  • Bowers Straight Edges & Parallels
    Manufactured out of spring steel these straight edges are precision ground.
    View Product
  • Bowers Steel Rules & Tapes
    Graduated Steel Straight Edge Manufactured to DIN 866/1 the gauging surfaces have been precision ground. The clear and easy to read metric graduations start 5mm in from the ends.
    View Product
  • Combination Length Bar Sets
    Combination Length Bars are made from the same high grade steel as the gauge blocks. These length bars are manufactured to BS 1790 (Imperial) and BS 5317 (Metric). The bars have a round section, are hardened to 64Rc and are precision lapped. Reference and calibration length bars are produced with plain ends and Inspection and Workshop grades have internal threaded holes in their end faces. This helps with the assembly of a combination of bars. A number of standard sets are available as well as individual sizes.
    View Product
  • Bowers Straight Edges & Parallels
    Manufactured out of spring steel these straight edges are precision ground.
    View Product
  • Bowers Steel Rules & Tapes
    Graduated Steel Rules Manufactured to DIN 866/2 these round ended steel rules start their graduations on the left edge. The top of the rule is graduated in inch readings 1/16", 1/32" and 1/64". The bottom is graduated in metric readings of 1/2mm and 1/1mm.
    View Product
  • Bowers Steel Rules & Tapes
    Graduated Steel Straight Edge Manufactured to DIN 866/1 the gauging surfaces have been precision ground. The clear and easy to read metric graduations start 5mm in from the ends.
    View Product
  • Bowers Angle Plates
    Manufactured from close grained cast iron, our high quality Angle Plates are supplied in their Grade A or B and are supplied with UKAS calibration certification as standard.
    View Product
  • Granite Tables & Plates
    Completely stress free after millions of years of natural stress relieving, high rigidity, corrosion free and non-magnetic, just some of the attributes that makes granite ideal for inspection purposes and anywhere an accurate stable datum is required. Granite Surface Tables are manufactured to BS817:1988 and are finished to the exacting tolerances required. Every table is supplied complete with a UKAS calibration certificate and a box section frame with adjusting supports. Tapped inserts and covers can also be supplied as extra. Surface plates are similar to the Tables in both grade and finish and provide a highly accurate datum surface for smaller inspection departments. Each Plate is supplied with UKAS certificates but without a support frame. Tapped inserts and covers can be supplied at extra cost.
    View Product
  • Granite Tables & Plates
    Completely stress free after millions of years of natural stress relieving, high rigidity, corrosion free and non-magnetic, just some of the attributes that makes granite ideal for inspection purposes and anywhere an accurate stable datum is required. Granite Surface Tables are manufactured to BS817:1988 and are finished to the exacting tolerances required. Every table is supplied complete with a UKAS calibration certificate and a box section frame with adjusting supports. Tapped inserts and covers can also be supplied as extra. Surface plates are similar to the Tables in both grade and finish and provide a highly accurate datum surface for smaller inspection departments. Each Plate is supplied with UKAS certificates but without a support frame. Tapped inserts and covers can be supplied at extra cost.
    View Product

Items 1 to 15 of 19 total

per page
Page:
  1. 1
  2. 2