Optical Measuring

Non-contact measuring solutions for process control and inspection

  • Baty Vision Systems - VuMaster
    The BATY VuMaster is a 2D vision system with a massive difference. Due to its innovative absolute 2D scale system, the VuMaster does not have a conventional moving stage or encoders - just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range - 400mm x 300mm. Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices. VuMaster allows inspection routines to be recorded and stored. When played back, these ‘programs’ run automatically using under CNC control using ‘Video Edge Detection’ to automatically ’capture’ measurment data from each of the features to be measured. Finally, a range of dimensional, multiple component and SPC reports can be generated including a fully dimensioned drawing of the measured part.
    View Product
  • Baty Vision Systems - Venture XT CNC
    The Venture XT- CNC has Fusion 3D software, a 300mm x 300mm x 200mm XYZ stage and includes a controller and 2 x 19 inch monitors. Venture CNC models take the power of fusion software one stage further by completely automating the inspection process. Now advanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators. CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification and auto focus changes are all recorded into the program. CNC Functionality The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using video edge detection for optimum speed and reduced inspection times. A probe changer rack can be installed so that probe modules fitted with a variety of pre-calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. When programming using the touch probe, use only the minimum points required to define each element. Then simply edit in the optimum number of points for each element. The new probe path is then automatically created when the program is played, cutting down both programming and inspection time. Alternatively, features can be programmed directly from an imported 3D CAD model.
    View Product
  • Baty Vision Systems - Venture Plus
    The Venture Plus range includes all of the standard Venture features with a little more... measuring range, that is.
    View Product
  • Baty R14 - Profile Projector
    The Baty R14 bench mount profile projector with its 340mm screen combines high accuracy non-contact measurement and inspection with a large 175mm x 100mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The compact and robust lightweight chassis makes the R14 ideal for workshop environments.
    View Product
  • Baty R400 - Profile Projector
    The Baty R400 bench mounted profile projector with its 400mm screen combines high accuracy non-contact measurement and inspection with a large 300mm x 150mm measuring range.
    View Product
  • Baty R600
    The Baty R600 with its 600mm (24") screen and high specification presents the capability to make simple comparative non-contact measurement through to complex programmed measuring sequences with SPC capability and automatic edge detection. The horizontal light beam configuration is ideally suited to large machined or turned workpieces for mounting in vee blocks and centres.
    View Product
  • Baty SM300 - Profile Projector
    300mm screen vertical light path projector with multi-function readout unit and printer. Robust design with full geometric measuring functionality ideal for the shop floor.
    View Product
  • Baty SM350 - Profile Projector
    This vertical light path 350mm / 14" diameter screen bench projector features a large, heavy duty high precision workstage with 250mm x 125mm measuring range and 0.5 micron resolution. Another feature is the option of a three lens turret for instant lens changes.
    View Product
  • Baty SM20 - Profile Projector
    The Baty SM20 is a vertical light path floor standing profile projector with a 500mm / 20” screen which features a large heavy duty high precision workstage with 250mm x 125mm measuring range and a 0.5 micron resolution.
    View Product
  • Fusion Software
    Fusion metrology software has been the foundation for Baty's camera based inspection systems for the last decade. The combination of ease of use, advanced edge detection and graphical reporting has established this remarkable software as the standard by which other vision packages are measured.
    View Product

Items 1 to 15 of 24 total

per page
Page:
  1. 1
  2. 2