Optical Measuring

Non-contact measuring solutions for process control and inspection

  • Baty Vision Systems - Venture Touch
    The highly successful Venture Touch range combines both manual and CNC axis that cover two differing stage sizes. Venture Touch 3D This advanced Vision system combines a manually operated X-Y measuring stage with a motorised Z axis. The advantage of this is that the servo motor driven Z axis can provide the all-important autofocus function for Z axis measurement without operator influence. Suitable for the shop floor, the rugged design features a steel / granite base with fully integrated PC controller running Baty’s all new 3 axis touch screen software - Fusion Touch. The full HD touch screen can be mounted on an adjustable arm and the software is arranged in a portrait layout for ease of use. Fusion Touch software features full geometric functionality so circles, lines, arcs and points can be measured using dedicated tools. Data points are automatically taken along the edge of the feature using Video Edge Detection then all measurements are automatically saved should the inspection need to be replayed for a batch of parts. All measured features appear in the part view where they can be dimensioned. The dimensional part view that can then be printed or exported to CAD Tolerances are set for each dimension so that the final inspection reports can classify each dimension as a pass or fail. Inspection playback During this process the operator is guided through the inspection routine via the graphical part view. Once the stage has been positioned so that the feature appears in the camera’s view, the Video Edge Detection tools take over and measure the feature automatically. If features are on different planes, the Z axis drives under CNC control to the correct position as defined by the original inspection. All lighting and magnification conditions are also recorded and re-created as each feature is visited. The end result is a highly repeatable process with no operator influence. Lighting The programmable LED lighting is also controlled using the touch screen. Segmented surface illumination,co-axial, through the lens and profile lighting conditions which can be adjusted to ensure that the feature edge is perfectly illuminated.
    View Product
  • Baty R14 - Profile Projector
    The Baty R14 bench mount profile projector with its 340mm screen combines high accuracy non-contact measurement and inspection with a large 175mm x 100mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The compact and robust lightweight chassis makes the R14 ideal for workshop environments.
    View Product
  • Baty Vision Systems - VuMaster
    The BATY VuMaster is a 2D vision system with a massive difference. Due to its innovative absolute 2D scale system, the VuMaster does not have a conventional moving stage or encoders - just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range - 400mm x 300mm. Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices. VuMaster allows inspection routines to be recorded and stored. When played back, these ‘programs’ run automatically using under CNC control using ‘Video Edge Detection’ to automatically ’capture’ measurment data from each of the features to be measured. Finally, a range of dimensional, multiple component and SPC reports can be generated including a fully dimensioned drawing of the measured part.
    View Product
  • Baty Vision Systems - Venture XT CNC
    The Venture XT- CNC has Fusion 3D software, a 300mm x 300mm x 200mm XYZ stage and includes a controller and 2 x 19 inch monitors. Venture CNC models take the power of fusion software one stage further by completely automating the inspection process. Now advanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators. CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification and auto focus changes are all recorded into the program. CNC Functionality The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using video edge detection for optimum speed and reduced inspection times. A probe changer rack can be installed so that probe modules fitted with a variety of pre-calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. When programming using the touch probe, use only the minimum points required to define each element. Then simply edit in the optimum number of points for each element. The new probe path is then automatically created when the program is played, cutting down both programming and inspection time. Alternatively, features can be programmed directly from an imported 3D CAD model. FREE RENISHAW TOOLCHANGER WORTH £1,684 WITH A MACHINE PURCHASE, VALID UNTIL 30/06/21.
    View Product
  • Baty Vision Systems - Venture Plus
    The Venture Plus range includes all of the standard Venture features with a little more... measuring range, that is.
    View Product
  • Baty R400 - Profile Projector
    The Baty R400 bench mount profile projector with its 400mm screen combines high accuracy non-contact measurement and inspection with a large 300mm x 150mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The robust design of the R400 makes it suitable for both the shop floor and the standards room.
    View Product
  • Baty SM300 - Profile Projector
    300mm screen vertical light path projector with multi-function readout unit and printer. Robust design with full geometric measuring functionality ideal for the shop floor.
    View Product
  • Baty SM350 - Profile Projector
    This vertical 350mm / 14" screen bench projector features a large, heavy duty high precision workstage with 250mm x 125mm measuring range and 0.5 micron resolution. Another feature is the option of a three lens turret for instant lens changes without re-calibration.
    View Product

Items 1 to 15 of 25 total

per page
Page:
  1. 1
  2. 2